FN NEW PRODUCT FN 509® TACTICAL

FN NEW PRODUCT FN 509® TACTICAL
The FN 509® Tactical, an extension of the FN 509 family, is based on FN’s submission pistol that the U.S. Army tested for its Modular Handgun Trials, but includes the significant improvements to the design that were implemented in the FN 509.

The pistol features the company’s patent-pending Low-Profile Optics Mounting System™ that enables the platform to accept more than ten commercially-available miniature red dot (MRD) optics that co-witness with the suppressor-height night sights and remain adaptable to future optics releases with no requirement of direct milling of the slide.

The slide cap, for use when not shooting with an optic, has raised sight wings that protect iron sight alignment if the pistol is dropped or jostled, and provides a textured ramp for racking the slide against a belt loop, pant pocket or boot. An FN-signature 4.5-inch, cold hammer-forged, stainless-steel barrel with target crown, ½” x 28 threads that accept the bulk of 9mm suppressors available and thread cap with integrated O-ring to prevent loosening during use complete the top end.

​Lastly, the 24-round magazines, nearly identical in length to the pistol’s slide, maximize ammunition capacity without impacting carry convenience.

NEW! XD-S Mod.2 in 9MM

Springfield Armory NEW! XD-S Mod.2 in 9MM CAPACITY NEVER TRUMPS RELIABILITY. NOW AVAILABLE IN 9MM

All the bullets in the world mean nothing if your concealed carry handgun fails when you need it most. The XD-S Mod.2® in 9mm is a less than one-inch wide pinnacle of reliability. 25K rounds without a stoppage and an integral grip safety for total peace of mind when carrying. 10 ROUNDS OF RELIABILITY The XD-S Mod.2® ships with two stainless steel magazines: a 7-round mag with a pinkie rest and additional flush floor plate for carry and one 9-round extended magazine – perfect for home defense. An 8-round extended magazine is also available for purchase. XD-S Mod.2® magazine sizes 10 ROUNDS OF RELIABILITY
The XD-S Mod.2® ships with two stainless steel magazines: a 7-round mag with a pinkie rest and additional flush floor plate for carry and one 9-round extended magazine – perfect for home defense. An 8-round extended magazine is also available for purchase. XD-S Mod.2® magazine sizes
FLUSH PLATE7 ROUND8 ROUND9 ROUND

XD-S MOD.2® 9MM W/ TRITIUM – XDSG9339BT Caliber 9mm MSRP $586 Barrel 3.3″Hammer Forged Steel, Melonite® Sights Ameriglo Pro-Glo Tritium Front / Tactical Rack Rear Frame Black Polymer w/ Enhanced Grip Texture Slide Steel, Melonite® Recoil System Dual Captive Recoil Spring w/ Full Length Guide Rod Length 6.3″ Height 4.3″ – 4.85″ w/ Extended Magazine Width .975″ Magazines (1) 7-Round w/ Pinkie Extension, (1) 9-Round Extended & (1) Flush Plate Weight 21.5 oz w/ Flush Magazine – 22.5 oz w/ Extended Magazine

XD-S Mod 2 versionsSMALLER 9MM FRAME The frame on the XD-S Mod.2® was designed around the 9mm round, resulting in a smaller frame and slimmer profile. XD-S Mod.2®

SAFETY The newly designed grip safety immediately readies the gun when gripped, and works with the striker safety to prevent the gun from firing when dropped. XD-s Mod.2® is

HIGHLY CONCEALABLE With a frame less than 1-inch wide, the XD-S Mod.2® chambered in 9mm disappears even under the lightest clothing.

Springfield Armory’s 911 .380 in Black Nitride

Springfield Armory’s 911 .380 is the perfect pistol for your EVERY day carry.

When the police are minutes away and the threat is seconds away…9-1-1…When you have to be your own first responder.

Springfield Armory’s 911 .380 is the perfect pistol for your EVERY day carry. The lightweight 7075 T6 aluminum frame and black Nitride or stainless 416 steel slide measure 5.5 inches long and less then 4 inches high, with a snag-free profile that’s undetectable under clothing. Springfield’s Octo-Grip™ front strap texturing ensures a secure grip and is complimented by a G10 Octo-Grip™ textured mainspring housing. G10 Thin-line grips and a short reset, crisp 5-pound G10 trigger shoe by Hogue® come together to give the feel of shooting a full-sized firearm. Designed for life-saving defensive use at close range, the 911 features an ambidextrous safety and is perfectly matched with an Ameriglo® Pro-Glo™ green tritium front sight inside a yellow luminescent circle, and a tactical rack rear sight with green tritium inside of white luminescent circles. Approved for the most advanced and modern .380 defensive ammunition, the 911 comes with a flush 6-round and 7-round extended magazine. The Springfield Armory 911 is also offered with integrated green Viridian® grip laser, making target acquisition all but effortless.

 

 

SPECS

CALIBER
.380 ACP
RECOIL SYSTEM
Full Length Guide Rod w/ Flat Wire Spring
SIGHTS
Pro-Glo™ Tritium/Luminescent Front & White Outlined Tritium Night Sight Rear
WEIGHT
12.6 oz
HEIGHT
3.9″
SLIDE
416 Black Nitride, Loaded Chamber Indicator
BARREL
2.7″ 416R Stainless Steel, Black Nitride Finish, 1:16 Twist
LENGTH
5.5″
GRIP TYPE
G10 Grips
FRAME
7075 T6 Anodized Hard Coat Aluminum, Octo-Grip Texture on Front Strap & Mainspring Housing, Extended Ambi Thumb Safety
MAGAZINES
1 – 6 Round Flush & 1 – 7 Round Extended, Stainless Steel
MSRP
$599.00

Ruger® Scout Rifle with Black Synthetic Stock

New Ruger® Scout Rifle with Black Synthetic Stock in .450 Bushmaster

A frequent request from hunters, the Scout Rifle chambered in .450 Bushmaster features a stainless steel finish and a lightweight synthetic stock. Combining the versatility of the Scout Rifle with the powerful knockdown capability of the .450 Bushmaster cartridge, this new rifle delivers the accuracy and reliability customers have come to appreciate and expect from Ruger® rifles.

NewImage

Stock Black Synthetic
Front Sight Protected Blade
Rear Sight Adjustable
Capacity 4
Thread Pattern 11/16”-24
Barrel Length 16.10”
Overall Length 37” – 38.50”
Material Stainless Steel
Finish Matte Stainless
Barrel Feature Ruger Precision Rifle® Hybrid Muzzle Brake
Length Of Pull 12.75” – 14.25”
Twist  1:16” RH
Weight 6.2 lb.
Grooves 6
Suggested Retail$1199.00
Features the Ruger Precision Rifle® Hybrid Muzzle Brake to effectively reduce recoil while minimizing noise and blast to the sides of the shooter (thread protector included).
The forward-mounted Picatinny rail allows for the mounting of modern optics, like an intermediate eye relief scope (not included), for “both eyes open” sighting and super-fast target acquisition.
Also offers a built-in, accurate sighting system with ghost ring adjustable rear aperture sight and a non-glare, protected blade front sight.
4-round, detachable box magazine with push-forward magazine release just forward of the trigger guard.
Integral scope mounts, machined directly on the solid-steel receiver, provide a stable mounting surface for scope rings, eliminating a potential source of looseness and inaccuracy in the field (scope rings included).
Soft rubber buttpad with buttpad spacers allows the rifle to be properly sized for different shooters or varying levels of outerwear (three, 1/2″spacers included).
Free-floated, cold hammer-forged barrel with ultra-precise rifling that provides exceptional accuracy, longevity and easy cleaning.
Rugged and reliable with a glass-reinforced nylon trigger guard and magazine well.
Non-rotating, Mauser-type controlled round feed extractor is the most positive case extraction system ever invented, and features a fixed blade-type ejector that positively ejects the empty cases as the bolt is moved fully rearward.
Also includes: rugged, one-piece, stainless steel bolt; three-position safety; sling swivel studs.

Getting Ready for Hunting??

The season is about to start! How about some practice with the new The Ruger 77/17® with 20″ Barrel

NewImage

The Ruger 77/17® with 20″ Barrel

Following on the heels of the successful reintroduction of the 77-Series bolt-action rifles, Ruger is also introducing the 77/17 chambered in .17 WSM with a 20″ blued alloy steel barrel and American walnut stock. Flat shooting and superbly accurate, this rifle also features an improved trigger pull over previous 77/17 WSM models.

MODEL NUMBER: 7217
CALIBER: 17 WSM
Stock American Walnut
Sights None
Barrel Length20”
Material Alloy  Steel
Twist1: 9″ RH
Capacity 6
Finish Blued
Weight 5.7  lb.
Overall Length 39.25″
Length of Pull 13.50”
Grooves 6
Suggested Retail $999.00
Integral scope mounts, machined directly on the solid-steel receiver, provide a stable mounting surface for scope rings, eliminating a potential source of looseness and inaccuracy in the field (scope rings included).
Three-position safety is easily accessible and allows the shooter to lock the bolt to load and unload the rifle with the safety engaged.
Solid, heat-treated alloy and stainless steel actions feature a rugged, stainless steel bolt with 90° bolt lift and ultra-fast lock time for added accuracy.
Detachable rotary magazine features a unique rotor to separate cartridges and provide reliable feeding. Mounts flush with the stock to eliminate protrusions at the rifle’s balance point.
Cold hammer-forged barrel results in ultra-precise rifling that provides exceptional accuracy, longevity and easy cleaning.
Also includes: sling swivel studs.

M&P®380 SHIELD™ EZ™ Pistol

M&P® Introduces M&P®380 SHIELD™ EZ™ Pistol
M&P® Introduces M&P®380 SHIELD™ EZ™ Pistol

Built for personal protection and every-day carry, the M&P380 Shield EZ is chambered in 380 Auto and is designed to be easy to use, featuring an easy-to-rack slide , easy-to-load magazine, and easy-to-clean design. Built for personal and home protection, the innovative M&P380 Shield EZ pistol is the latest addition to the M&P M2.0 family and provides an easy-to-use protection option for both first-time shooters and experienced handgunners alike.

Other Features
• Easy to rack slide.
• Crisp, light trigger with tactile and audible trigger reset.
• Includes (2) Easy to Load 8-Round M&P380 Shield magazines.
• Grip safety – grip pistol to fire.
• Windage adjustable, white dot rear sight (tool included).
• Can disassemble without pulling trigger.
• Grip texture optimized to size and recoil.
• Tactile loaded chamber indicator (TLCI) – can see and feel if there is
a round in the chamber.
• Available with or without ambidextrous, manual thumb safety.
• Picatinny-style equipment rail for lights or lasers.
• Perfect size for nightstand or carry, or a day at the range.
• Reversible magazine release.
• Thin and lightweight – can be comfortably carried all day.
• Optimal 18-degree grip angle for natural point of aim.
• Armornite® durable corrosion resistant finish.

ALL BACKED BY OUR SMITH & WESSON LIFETIME SERVICE POLICY.
Availability subject to applicable federal, state and local laws, regulations, and ordinances.

SPRINGFIELD CUSTOM™ Hand-Built 1911s

SPRINGFIELD CUSTOM™ Hand-Built by the Masters - 1911s from Springfield CustomSPRINGFIELD CUSTOM™ Hand-Built by the Masters – 1911s from Springfield Custom

At Springfield Custom™ our pistolsmiths do things the old way….the Old World way, like individually hand fitting every major component in your gun.

Our custom pistolsmiths have over 200 combined years of experience building custom pistols in this very shop; many of whom are distinguished members of the American Pistolsmith Guild. Our products are used by professionals all over the world in military and law enforcement groups, some large, some small, and some we can’t mention. Our competition pistols have been used to win national and world championships in every major pistol discipline by such greats as the legendary Rob Leatham, John Farley, the late Alan Fulford and the late Roger Willis, just to name a few.

For more information, click link above.

Models available:
CUSTOM CARRY 1911-A1, .45ACP (CA LEGAL MODEL)
ULTIMATE CARRY 1911-A1
COMPACT CARRY 1911-A1
NATIONAL MATCH HARDBALL 1911-A1
BULLSEYE WADCUTTER 1911-A1
1911-A1 PPC DISTINGUISHED/1500
DISTINGUISHED CLASSIC, .45ACP
1911 SSC (SINGLE STACK CLASSIC)
1911-A1 TGO 1, .45ACP
PROFESSIONAL LIGHT RAIL 1911-A1, 9MM
PROFESSIONAL LIGHT RAIL 1911-A1, .45ACP
PROFESSIONAL 1911-A1, 9MM
PROFESSIONAL 1911-A1, .45ACP

Diamond Gray Mark IV™ 22/45™ Lite

Diamond Gray Mark IV™ 22/45™ LiteDiamond Gray Mark IV™ 22/45™ Lite

The popular Mark IV™ 22/45™ Lite now features a new anodized finish for 2018 – Diamond Gray. Additional features of the Lite model include a lightweight, ventilated, aerospace-grade aluminum receiver, and a comfortable, precision-molded polymer grip frame. This model is now also available with a non-threaded barrel. Find yours today!

SAINT™ EDGE AR-15 SBR – 5.56

SAINT™  EDGE AR-15 SBR – 5.56
Springfield Armory’s SAINT AR-15 series expands to include the SAINT EDGE SBR, featuring an 11.5” CMV light-weight profiled 1:8 twist barrel that is Melonite® finished inside and out for the ultimate in corrosion resistance. This configuration was selected as the best balance between length and ballistic performance of the 5.56 cartridge.

The SAINT EDGE SBR, with its lightened billet lower, provides superior accuracy thanks in part to a free-float handguard featuring Springfield’s rock-solid proprietary attachment system. With four attachment points anchoring it to the barrel nut, this M-Lok compatible handguard was designed to withstand the hard use of law enforcement and military operations. Under the handguard is Springfield’s pinned multi/mode adjustable gas block for suppressed or unsuppressed use.

Machined from aircraft grade 7075 T6 aluminum and Type III hard coat anodized, the lower receiver is equipped with the Accu-Tite™ tension system, which reduces movement between the upper and lower receiver. No corners were cut on the MPT (magnetic particle tested) enhanced M16 bolt carrier group – the heart of any premium AR. This BCG is finished with super-hard Melonite® and carries a 9310 steel bolt.

The SAINT EDGE SBR billet lower features QD mounts machined into the receiver and weight reducing cuts that lighten it by two ounces. An ambidextrous 90-degree safety and extended mid-sized charging handle add features that are popular among tactical shooters. The trigger is an exclusive proprietary short-reset single stage design with a crisp and precise feel. A Bravo Company stock, pistol grip and Magpul Gen M3 PMAG finish off this combat grade short-barreled rifle.

For those looking for light, tight and quick-handling short-barreled rifle with top quality features throughout, the SAINT EDGE SBR with its lightweight billet-lower receiver is the ultimate hard use combat carbine.

NFA Disclaimer: These firearms are under regulation by the National Firearms Act (NFA). It is the buyer’s responsibility to comply with all NFA rules, restrictions and/or laws determined by your city or state. Please ensure you are up-to-date on all current legal terms regarding your purchase.

New SAINT™ AR-15 Pistol in .300 BLK

The SAINT™ AR-15 Pistol in .300 BLK harnesses the power of the battle-proven round for more capability and versatility in a compact platform.

Complete with a rugged SB Tactical SBX-K forearm brace and a 9-inch Melonite® treated CMV barrel, the SAINT AR-15 Pistol is small, fast, and ideal for CQB. The patent-pending free float handguard design, nickel boron-coated GI single-stage trigger, pinned, low-profile adjustable gas block and exclusive Accu-Tite™ tension system complete this compact, combat-grade package.

The compact design is the perfect complement to the .300 BLK round making the SAINT AR-15 Pistol an ideal choice for home defense. At just 27.75 inches long, and weighing only 5.9 pounds, this new AR pistol in .300 BLK from Springfield Armory® delivers a lot of power in a small, fast-handling package.
New SAINT™ AR-15 Pistol in .300 BLK