Walther Arms $100 Cash Back Mail-In Rebate

From June 1st through September 15th

Walther Arms is offering a $100 Cash Back when you purchase any of the following new Walther pistols:

PPQ M1, PPQ M2 4″, PPQ M2 5″, PPQ Navy, PPQ 45,

PPS M2, PPS M2 LE, PPS M2 Laser Set.
Walther rebate

Click here to learn more: http://www.waltherarms.com/rebate100/

Mark IV™ Recall

Ruger recently discovered that all Mark IV™ pistols (including 22/45™ models) manufactured prior to June 1, 2017 have the potential to discharge unintentionally if the safety is not utilized correctly. In particular, if the trigger is pulled while the safety lever is midway between the “safe” and “fire” positions (that is, the safety is not fully engaged or fully disengaged), then the pistol may not fire when the trigger is pulled. However, if the trigger is released and the safety lever is then moved from the mid position to the “fire” position, the pistol may fire at that time.
Ruger Recalls Mark IV

Mark I, Mark II™ and Mark III™ Pistols are not affected by this recall

Although only a small percentage of pistols appear to be affected and we are not aware of any injuries, Ruger is firmly committed to safety and would like to retrofit all potentially affected pistols with an updated safety mechanism.

Until your Mark IV™ pistol has been retrofitted or you verify that it is not subject to the recall, we strongly recommend that you not use your pistol.
How To Determine If Your Pistol Needs The Retrofit

SerialHow to find your serial number All Mark IV™ pistols produced prior to June 1, 2017 are potentially affected and therefore are being recalled. This includes Mark IV™ Target, Hunter, Competition, 22/45™, 22/45™ Lite and 22/45™ Tactical models. These models bear serial numbers beginning with “401” (2017 models) or “WBR” (2016 models).

Firearms NOT subject to the Recall

Newly manufactured Mark IV™ pistols will begin with serial number “500.” Thus, if you have a Mark IV™ or 22/45™ pistol with a serial number beginning with the number “5,” your pistol is not subject to the recall.
Firearms That Have Been Retrofitted Already

For More Information visit: recall info

Crimson Trace Laser Guard® For Smith & Wesson

Crimson Trace Products For Smith and Wesson 2017
Laserguard

Springfield Gear Up Sale

GearUp2017 TopLogo

GearUp2017 Gear476x486

Purchase ANY new Springfield Armory® 9MM, .40SW OR .45ACP pistol February 1 – June 30, 2017 and receive:

4 EXTRA MAGAZINES DOUBLE MAG POUCH RIGHT HAND HOLSTER

FREE!

Smith & Wesson Rebates up to $75!

ACT NOW, Mail-In Rebate Promotion Ends June 30, 2017

Smith and Wesson Rebate

ACT NOW – The “Savings You Can Carry” consumer mail-in rebate promotion ends June 30th, 2017.
Several of the company’s most popular and sought after firearms are included in the promotion, including a $75 rebate on the M&P SHIELD®.

During the “Savings You Can Carry” validity period, consumers can receive $75 dollars back on the purchase of a NEW M&P Shield pistol, $50 dollars back on the purchase of a NEW M&P Bodyguard 380 pistol or $25 dollars back on the purchase of a NEW S&W® SD™ or SDVE™ pistol (PERFORMANCE CENTER MODELS INCLUDED).

Consumers who wish to participate in the offer must complete and submit the rebate form, in one of three ways:
• Complete and submit the form online at www.smith-wesson.com/rebates.
• Download the rebate form at www.smith-wesson.com, complete and submit via U.S. mail.
• Obtain a rebate form at your local Smith & Wesson dealer, then complete and submit via U.S. Mail.
All submissions must include proof of purchase and be submitted on or before July 31, 2017.

Springfield XDE The Hammer Reinvented

Xde pistol

Springfield XDE 3.3” Single Stack

There are some tools so basic, you can’t imagine being without them.
But even essential tools can be refined and improved.

That’s the principle behind the new XD-E™ the best elements of the world-renowned XD® Series, condensed into a weapon so intuitive, comfortable and accurate, you can’t imagine being without it.

The low-effort slide practically racks itself, so handling’s a pleasure.
The exposed hammer clearly shows gun mode, and the single/double action trigger shows respect for your shooting style, unlike other compacts.

New shooter or skilled gunner, wrap your mitt around the new
XD-E™ and you’ll know. This is more than a hammer.

It redefines what your hammer should be.

The best elements of the world-renowned XD® Series, condensed into a pistol so intuitive, comfortable and accurate, you can’t imagine being without it. Springfield Armory® defends your legacy with world-class pistols and unapologetic commitment to self-defense

Ruger® LCP® II with Integrated Laser

Ruger® LCP® II with Integrated Laser

Ruger® LCP® II with Integrated Laser
Model Number: 3758 Caliber: 380 Auto

Capacity6+1
Barrel Length2.75″
Overall Length5.17″
Weight11.4 oz.
Grip FrameBlack, High-Performance, Glass-Filled Nylon

Slide MaterialAlloy Steel
Barrel MaterialAlloy Steel
Slide Width0.75″
SightsIntegral
Twist1:16″ RH
Grooves6

Slide FinishBlued
Barrel FinishBlued
Height3.71″
CA ApprovedNo
MA Approved & CertifiedNo
Suggested Retail$439.00

Viridian® E-Series™ Red (635-650 nm) Laser.

Compact at just 5.17″ long and 3.71″ tall, the LCP® II is designed to fit a variety of holsters and provide concealed carry options.

Rugged construction with through-hardened steel slide and black, one-piece, high-performance, glass-filled nylon grip frame.

Short, crisp trigger pull with single-action feel.

Textured grip frame provides a secure and comfortable grip. Larger grip frame surface provides better distribution of recoil forces.

Includes finger grip extension floorplate that can be added to the magazine for comfort and grip.

Easy-to-rack slide designed to hold open after last round ejection.

Blued, alloy steel barrel.

Improved sights for superior visibility. Fixed front and rear sights are integral to the slide, while the hammer is recessed within the slide.

Safety features include bladed trigger safety; neutrally balanced sear with significant engagement and strong spring tension; and hammer catch to help prevent the hammer from contacting the firing pin unless the trigger is pulled.

Also includes a pocket holster and one 6-round magazine.

Note: Six-round LCP® magazines are compatible with the LCP® II, but will not activate the last round hold-open feature of the LCP® II. Seven-round LCP® magazines are NOT compatible with the LCP® II.

Ruger Mark IV™ 22/45™ Tactical

Mark IV™ 22/45™ Tactical
The perfect tactical rimfire trainer

Simple, one-button takedown for quick and easy field-stripping and proper chamber to muzzle cleaning.

A recessed button in the back of the frame allows the upper receiver to tilt up and off of the grip frame without the use of tools.

Ergonomic bolt stop.

Internal cylindrical bolt construction ensures permanent sight to barrel alignment and higher accuracy potential than conventional moving slide designs.

Contoured ejection port and easy-to-grasp bolt ears allow for durable and reliable operation round after round.

Accurate sighting system features adjustable rear sight and drilled and tapped receiver for Weaver- or Picatinny-style rail for easy mounting of optics.

Ambidextrous manual safety positively locks the sear in the “SAFE” position when applied. Safety can be converted to left-side only with included washer.

Features a conveniently located push-button magazine release on the left side of the frame.

Magazine drops free on release for faster reloading.

Magazine disconnect prevents discharge when the magazine has been removed.

Also includes: two, 10-round magazines.

Threaded barrel and top and bottom picatinny rails for attaching tactical accessories.

Simple, One-Button Takedown

New Mark IV™ Competition

Mark IV™ Competition

PERFECTING THE RIMFIRE – AGAIN

Simple, one-button takedown for quick and easy field-stripping and proper chamber to muzzle cleaning.

A recessed button in the back of the frame allows the upper receiver to tilt up and off of the grip frame without the use of tools.

Ergonomic bolt stop.

Internal cylindrical bolt construction ensures permanent sight to barrel alignment and higher accuracy potential than conventional moving slide designs.

Contoured ejection port and easy-to-grasp bolt ears allow for durable and reliable operation round after round.

Accurate sighting system features adjustable rear sight and drilled and tapped receiver for Weaver- or Picatinny-style rail for easy mounting of optics.

Ambidextrous manual safety positively locks the sear in the “SAFE” position when applied. Safety can be converted to left-side only with included washer.

Features a conveniently located push-button magazine release on the left side of the frame.

Magazine drops free on release for faster reloading.

Magazine disconnect prevents discharge when the magazine has been removed.

Also includes: two, 10-round magazines.

Simple, One-Button Takedown

New Ruger American Pistol©

Model Number: 8648 Caliber: 45 Auto

Ruger American Pistol© Capacity10+1
Slide MaterialStainless Steel
Barrel Length3.75″
Grip FrameOne-Piece, High-Performance, Glass-Filled Nylon
GripsErgonomic Wrap-Around Grip Module

Safety OptionManual Safety
SizeCompact
Slide FinishBlack Nitride
Slide Width1.05″
SightsNovak® LoMount Carry 3-Dot
Weight29 oz.

Overall Length7.25″
Height4.65″
Grooves6
Twist1:16″ RH
CA ApprovedNo
MA Approved & CertifiedNo
Suggested Retail$579.00

Trigger features a short takeup with positive reset.

Recoil-reducing barrel cam, low-mass slide, low center of gravity and low bore axis.

Performance tested for sustained +P ammunition use.

Genuine Novak® LoMount Carry three-dot sights.

Modular wrap-around grip system for adjusting palm swell and trigger reach.

Safe, easy takedown with no tools or trigger pull required.

Ambidextrous slide stop and magazine release allow actuation with either hand.

Safety features include internal, automatic sear block system, ambidextrous manual safety, integrated trigger safety and no trigger pull required for takedown.

Also includes – Two nickel-Teflon® plated steel magazines (one 7-round and one 10-round with grip extension); medium and large grip modules.

Pre-tensioned striker system features a powerful striker spring for positive ignition without a heavier trigger pull.

Non-slip surfaces including functional slide serrations and purpose-oriented grip frame texturing for enhanced control.

MIL-STD-1913 Picatinny rail acts as a mounting point for a wide variety of standard lights, lasers and infra-red illuminators.

Visual inspection port allows for visual confirmation of a loaded or empty chamber.

%d bloggers like this: