Remington Rebates Now through July 30th

Remingtong Rebates

Click on Image for details

Sig P320 Air Pistol

P320 ASP Sig Air Pistol

MODEL P320 ASP
OPERATING SYSTEM 12 Gram CO2
CALIBER .177 cal
MUZZLE VELOCITY Up to 430 fps*
TRIGGER WEIGHT 7 lb DA / 4 lb SA (31 N / 18 N)
ACCESSORY RAIL M1913
MAGS INCLUDED (1) 30rd Pellet Mag
OVERALL LENGTH 9.6 in.
WEIGHT 2.2 lbs
MSRP $119.99

Details
Our modular, striker-fired pistol is imitated here in ASP featuring a full blowback metal slide, steel rifled barrel and a few built-in performance advantages – low audible profile, practice space versatility and radically less expensive ammunition. The ASP line of pistols allows shooters to train for a quick, accurate response.

Please Note: CO2 and pellets are sold separately.

*Results may vary based on ammo weight, temperature, and altitude.

Walther Arms $100 Cash Back Mail-In Rebate

From June 1st through September 15th

Walther Arms is offering a $100 Cash Back when you purchase any of the following new Walther pistols:

PPQ M1, PPQ M2 4″, PPQ M2 5″, PPQ Navy, PPQ 45,

PPS M2, PPS M2 LE, PPS M2 Laser Set.
Walther rebate

Click here to learn more: http://www.waltherarms.com/rebate100/

Mark IV™ Recall

Ruger recently discovered that all Mark IV™ pistols (including 22/45™ models) manufactured prior to June 1, 2017 have the potential to discharge unintentionally if the safety is not utilized correctly. In particular, if the trigger is pulled while the safety lever is midway between the “safe” and “fire” positions (that is, the safety is not fully engaged or fully disengaged), then the pistol may not fire when the trigger is pulled. However, if the trigger is released and the safety lever is then moved from the mid position to the “fire” position, the pistol may fire at that time.
Ruger Recalls Mark IV

Mark I, Mark II™ and Mark III™ Pistols are not affected by this recall

Although only a small percentage of pistols appear to be affected and we are not aware of any injuries, Ruger is firmly committed to safety and would like to retrofit all potentially affected pistols with an updated safety mechanism.

Until your Mark IV™ pistol has been retrofitted or you verify that it is not subject to the recall, we strongly recommend that you not use your pistol.
How To Determine If Your Pistol Needs The Retrofit

SerialHow to find your serial number All Mark IV™ pistols produced prior to June 1, 2017 are potentially affected and therefore are being recalled. This includes Mark IV™ Target, Hunter, Competition, 22/45™, 22/45™ Lite and 22/45™ Tactical models. These models bear serial numbers beginning with “401” (2017 models) or “WBR” (2016 models).

Firearms NOT subject to the Recall

Newly manufactured Mark IV™ pistols will begin with serial number “500.” Thus, if you have a Mark IV™ or 22/45™ pistol with a serial number beginning with the number “5,” your pistol is not subject to the recall.
Firearms That Have Been Retrofitted Already

For More Information visit: recall info

Ruger American Rimfire® Stainless

Ruger American Stainless Rimfire

Ruger is Proud to Introduce the Ruger American Rimfire® Stainless
In response to voice of the customer feedback, Ruger engineers have worked diligently to create a stainless steel configuration of this popular rifle in three calibers. Available in .22 LR, .22 WMR and .17 HMR, these stainless steel and synthetic rimfire rifles live up to Ruger’s reputation for accurate, rugged and reliable firearms.

Ruger American Rimfire® Target

Ruger American Rimfire® Target

Ruger  American Rimfire target modelThe new Ruger American Rimfire® Target model is built for exceptional accuracy with a 0.860″ diameter, cold hammer-forged, 1/2-28″ threaded target barrel. Available in .22 LR, .22 WMR and .17 HMR, with a free-floated barrel and one-piece Picatinny rail, this rifle is ready for your favorite optic. Like every Ruger American Rimfire® rifle, this Target model features the Ruger Power Bedding® integral bedding blocks, crisp Ruger Marksman Adjustable™ trigger and patented, detachable rotary magazine. The Target model also features a black laminate stock and factory-installed, knurled thread protector.

Crimson Trace Laser Guard® For Smith & Wesson

Crimson Trace Products For Smith and Wesson 2017
Laserguard

Springfield Gear Up Sale

GearUp2017 TopLogo

GearUp2017 Gear476x486

Purchase ANY new Springfield Armory® 9MM, .40SW OR .45ACP pistol February 1 – June 30, 2017 and receive:

4 EXTRA MAGAZINES DOUBLE MAG POUCH RIGHT HAND HOLSTER

FREE!

Smith & Wesson Rebates up to $75!

ACT NOW, Mail-In Rebate Promotion Ends June 30, 2017

Smith and Wesson Rebate

ACT NOW – The “Savings You Can Carry” consumer mail-in rebate promotion ends June 30th, 2017.
Several of the company’s most popular and sought after firearms are included in the promotion, including a $75 rebate on the M&P SHIELD®.

During the “Savings You Can Carry” validity period, consumers can receive $75 dollars back on the purchase of a NEW M&P Shield pistol, $50 dollars back on the purchase of a NEW M&P Bodyguard 380 pistol or $25 dollars back on the purchase of a NEW S&W® SD™ or SDVE™ pistol (PERFORMANCE CENTER MODELS INCLUDED).

Consumers who wish to participate in the offer must complete and submit the rebate form, in one of three ways:
• Complete and submit the form online at www.smith-wesson.com/rebates.
• Download the rebate form at www.smith-wesson.com, complete and submit via U.S. mail.
• Obtain a rebate form at your local Smith & Wesson dealer, then complete and submit via U.S. Mail.
All submissions must include proof of purchase and be submitted on or before July 31, 2017.

Ruger® Silent-SR® ISB Integrally Suppressed Barrel

Ruger® Silent-SR® ISB Integrally Suppressed Barrel

Ruger® Silent-SR® ISB
The Ruger® Silent-SR® ISB features best-in-class materials and an advanced design, resulting in a lightweight, compact size and top-tier sound reduction.

Reduces sound pressure levels of .22 LR to an average of 113.2 dB with standard velocity ammunition.

Lightweight for balance and portability. Once installed on the firearm, the center of gravity is close to the receiver, making it easy to maneuver and shoot.

Easy to disassemble and clean. All internal components seal together to keep the byproducts of combustion away from the tube. A single screw retains the baffles and cap within the sleeve and doubles as a removal tool. The included 5/32″ hex key tool allows the integrally suppressed barrel to be completely disassembled for cleaning.

Sleeve surrounding the 17-4 stainless baffles is matched to the forend for a clean, but distinctive, appearance.

Stainless steel barrel, baffles and front cap were chosen for maximum strength and serviceability. The aluminum sleeve is permanently attached to the barrel to minimize weight and maintain a minimum overall length.

%d bloggers like this: